Our HPL sheets in anthracite are available in thicknesses of 6mm and 8mm. The decorative panels have on both sides a scratch-resistant, non-porous surface in anthracite, so that our panels are also ideal as balcony light protection or partition wall and comply with the standard EN 439. Our HPL plates, which we deliver you in millimeter precision cut to your desired size, are pressed under very high pressure from several layers of kraft paper impregnated in phenolic resin in the core and melamine resin-soaked decorative papers for the surfaces, into a compact, homogeneous plate.
The so-called high-pressure laminate (High Pressure Laminate), are suitable for permanent outdoor use.
HPL sheets are highly weather resistant and therefore defy all weather conditions. The sheets are resistant to adverse environmental conditions (for example acid rain) and are resistant to frost and heat. The surfaces of our HPL panels in anthracite are lightfast and UV-resistant and therefore do not fade even when used outdoors or even in strong sunlight.
Our anthracite gray HPL sheets are characterized by high mechanical strength and are extremely robust, rigid and impact resistant. The surfaces of our HPL sheets are solvent-resistant and scratch-resistant and can be cleaned very easily beacuse of its non-porous surfaces. For simple soiling it is sufficient to clean the surfaces with clean water and clean, soft wipes. Stronger, more stubborn soils (for example graffiti) can be easily removed with organic based solvents (acetone, alcohol, gasoline, or isopropyl alcohol) in the most cases.
NOTE: Please do not use scouring agents, scouring pads or polishes to clean the surfaces, as they may otherwise get damaged.
Our HPL sheets in dark anthracite are, like all our HPL sheets, environmentally friendly. The sheets of high-pressure laminate are free of heavy metals, organic halogens (fluorine, bromine, chlorine, etc.) and asbestos and are also considered as physiologically harmless.
Save time and money and order your HPL sheets in anthracite directly in your desired size.
Cutting HPL sheets doesn't only requires time, it also requires special tungsten carbide or diamond coated saw blades. With our cutting configurator we offer you the possibility to order your HPL sheets in anthracite directly in the sizes you need. This saves you time, because we take care of cutting them on one of our panel saws with CNC control, to the millimeter according to your specifications for you. Cutted HPL sheets are also much cheaper compared to whole boards.
You need HPL sheets in anthracite in formats that are larger than the blank configurator allows? On request it is possible for us to deliver blanks up to a maximum format of 4200mm x 1860mm. Just send us an E-Mail with your request and inform us about the quantity per delivery and the dimensions you need for length and width in millimeters. We also need information on whether you want your HPL panels in 6mm thickness or 8mm thickness. We will process your request as soon as possible and send you a tailored, cost-effective offer including shipping costs by E-Mail.
- Large facade cladding in dark anthracite are often realized with HPL panels
- Our HPL sheets in anthracite are suitable for opaque partition walls thanks to the decorative surface on both sides
- Balcony panels made of HPL sheets in anthracite are visually appealing, easy to care for and absolutely weatherproof
- Our impact-resistant, rigid HPL boards are excellently suited for the construction of playground equipment
- and many more
Our double-sided anthracite-gray HPL sheets can be easily sawed or milled. It should be noted, that high-pressure laminate is comparable hard as hardwood, which is why it must be handled in the same way as hardwood. This means, that saw blades made of tungsten carbide or diamond-tipped saw blades should be used to cut HPL sheets.
Drill bits made of tungsten carbide or HSS drills should also be used for drilling holes. The HPL plates should lay on a flat surface to prevent breakouts when the drill emerges. With special facade plate drills with centering tip for HPL plates, breakouts are not expected, so you can drill holes without backing or freehand.
Painting is unnecessary because of the high-weather resistant surface of our HPL sheets, but basically quite possible. There are certain issues to be aware of when painting, such as surface treatment and the use of special primers and varnishes.
NOTE: Our HPL sheets are delivered without protective film. When working and processing please take care and do not push the panels over each other or pull them over an edge to avoid scratches on the surfaces.