Our HPL boards with a double-sided white surface are available directly in the desired size in the thicknesses 6mm and 8mm and comply with the standard EN439. The decorative multi-layer panels of high-pressure laminate consist in the core of several layers of kraft paper, which is soaked in phenolic resin. The surfaces on both sides are made of white, melamine resin-impregnated decor papers, which are pressed under very high pressure into a compact HPL plate.
Decor panels made of HPL are highly resistant to weathering and therefore ideally suited for outdoor use as a visual protection panel or facade cladding. HPL sheets are lightfast, UV. and weather resistant and defy even the most adverse environmental conditions, such as acid rain. The white high pressure laminates are non-corrosive and resistant to heat and frost.
HPL sheets are extremely impact resistant and have a scratch-resistant surface. They have high mechanical strength and are rigid.
Furthermore, HPL boards are considered as environmentally friendly. They are free of heavy metals, asbestos or organic halogens (chlorine, fluorine, bromine or sulfur compounds) and are physiologically harmless. Our HPL sheets in white have building inspectorate approvals so that they can also be used in the commercial sector.
HPL sheets in white, like all our HPL sheets, have a non-porous surface, making them very easy to clean. For light soiling, clean with clear water and clean wipes. In the most cases even stubborn dirt such as graffiti can be easily removed with organic solvents (acetone, spirit, etc.).
NOTE: Do not use scouring agents, scouring pads or polishes to clean the surfaces, as they may otherwise get damaged.
We deliver your white HPL boards directly in your desired size
Thanks to our cut configurator, you can order the white HPL sheets directly in your desired size up to a maximum size of 1850mm x 1000mm online. The cutting takes place on one of our modern panel saws for horizontal cutting with a low tolerance of just +/- 1mm. This not only saves you time for cutting, it also does not require any special carbide saw blades, which are recommended for sawing hard multilayer boards. Simply choose between the available thicknesses of 6mm or 8mm and enter your desired dimensions in millimeters in the input fields. Our cutting configurator determines your individual, low price depending on the information you have entered and the desired quantity.
For larger formats of our white HPL plates, please send us a request by E-Mail with all necessary information, which we need for the creation of an offer.
- White HPL boards are often used as privacy screens for balconies
- White HPL panels are used for large-scale facade cladding of immovables
- Fence elements made of white HPL panels ensure permanent privacy of your property
- Banister panels with white HPL panels are possible for in- and outdoors
- and many more
Decorative multilayer boards such as HPL, our double-sided white boards, can be cut to size or finished in a variety of ways. Basically, the processing of HPL boards equals the processing of hardwood. HPL sheets can be easily cut with tungsten carbide saw blades or diamond-tipped saw blades. Milling or drilling HPL plates also requires simple tools for processing metal, such as HSS-drills.
For drilling holes, we recommend the use of center-tipped faceplate drills as they are not expected to break out, even if the HPL does not lay on a flat surface.
The painting of HPL panels is possible, but requires certain preparation steps and special paints, as well as a pretreatment with a corresponding primer. Due to the UV- and weather-resistant surface of our HPL boards, painting is not necessary and requires regular renewal of the paint layers.
NOTE: Our HPL sheets are delivered without protective film. When working and processing please take care and don't push the panels over each other or pull them over an edge to avoid scratches on the surfaces.